Note: Andy Bierman serves as MIB advisor. The IPPM WG will develop a set of standard metrics that can be applied to the quality, performance, and reliability of Internet data delivery services. These metrics will be designed such that they can be performed by network operators, end users, or independent testing groups. It is important that the metrics not represent a value judgment (i.e. define "good" and "bad"), but rather provide unbiased quantitative measures of performance. Functions peripheral to Internet data delivery services, such as NOC/NIC services, are beyond the scope of this working group. The IPPM WG will produce documents that define specific metrics and procedures for accurately measuring and documenting these metrics. The metrics are: - connectivity - one-way delay and loss - round-trip delay and loss - delay variation - loss patterns - packet reordering - bulk transport capacity - link bandwidth capacity This is the cumulative set, including the metricsalready completed and published. The working group will closely review and then be guided by an IESG document on how metrics advance along the standards track within the IETF. This document will also be relevant to the work of the benchmarking working group (BMWG). The first draft of this document was discussed at IETF 51. Additionally, the WG will produce Proposed Standard AS documents, comparable to applicability statements in RFC 2026, that will focus on procedures for measuring the individual metrics and how these metrics characterize features that are important to different service classes, such as bulk transport, periodic streams, or multimedia streams. It is specifically out of scope for this working group to actually characterize traffic, for example to characterize a voice-over-IP stream. Each AS document will discuss the performance characteristics that are pertinent to a specified service class; clearly identify the set of metrics that aid in the description of those characteristics; specify the methodologies required to collect said metrics; and lastly, present the requirements for the common, unambiguous reporting of testing results. Specific topics of these AS documents must be approved by the Area Directors as charter additions. The WG will produce a protocol to enable communication among test equipment that implements the one-way metrics. The intent is to create a protocol that provides a base level of functionality that will allow different manufacturer's equipment that implements the metrics according to a standard to interoperate. A protocol requirements document will guide the protocol design. The WG will also produce a MIB to retrieve the results of IPPM metrics, such as one-way delay and loss, to facilitate the communication of metrics to existing network management systems. Thus, the group will create a MIB that contains predominantly read only variables. If, after the protocol requirements document is finished, the group decides that it is appropriate to add variables that control the underlying measurements that the metrics report, such a control structure may be added as a separate document, subject to review by the IESG. The intent of the WG is to cooperate with other appropriate standards bodies and forums (such as T1A1.3, ITU-T SG 12 and SG 13) to promote consistent approaches and metrics. Within the IETF process, IPPM metrics definitions will be subject to as rigorous a scrutiny for usefulness, clarity, and accuracy as other protocol standards. The IPPM WG will interact with other areas of IETF activity whose scope intersect with the requirement of these specific metrics. These include working groups such as BMWG, RMONMIB, and TEWG.