module ietf-layer0-types {
yang-version 1.1;
namespace "urn:ietf:params:xml:ns:yang:ietf-layer0-types";
prefix "l0-types";
organization
"IETF CCAMP Working Group";
contact
"WG Web:
WG List:
Editor: Haomian Zheng
Editor: Young Lee
Editor: Aihua Guo
Editor: Victor Lopez
Editor: Daniel King
";
description
"This module defines Optical Layer 0 types. This module
provides groupings that can be applicable to Layer 0
Fixed Optical Networks (e.g., CWDM (Coarse Wavelength
Division Multiplexing) and DWDM (Dense Wavelength Division
Multiplexing)) and Flexi-grid Optical Networks.
Copyright (c) 2020 IETF Trust and the persons identified
as authors of the code. All rights reserved.
Redistribution and use in source and binary forms, with
or without modification, is permitted pursuant to, and
subject to the license terms contained in, the Simplified
BSD License set forth in Section 4.c of the IETF Trust's
Legal Provisions Relating to IETF Documents
(http://trustee.ietf.org/license-info).
This version of this YANG module is part of RFC XXXX; see
the RFC itself for full legal notices.";
revision "2020-12-29" {
description
"Initial Version";
reference
"RFC XXXX: A YANG Data Model for Layer 0 Types";
}
typedef dwdm-n {
type int16;
description
"The given value 'N' is used to determine the nominal central
frequency.
The nominal central frequency, 'f' is defined by:
f = 193100.000 GHz + N x channel-spacing (measured in GHz),
where 193100.000 GHz (193.100000 THz) is the ITU-T 'anchor
frequency' for transmission over the C band; and where
'channel-spacing' is defined by the dwdm-ch-spc-type.";
reference
"RFC6205: Generalized Labels for Lambda-Switch-Capable (LSC)
Label Switching Routers,
ITU-T G.694.1 (02/2012): Spectral grids for WDM applications:
DWDM frequency grid";
}
typedef cwdm-n {
type int16;
description
"The given value 'N' is used to determine the nominal central
wavelength.
The nominal central wavelength is defined by:
Wavelength = 1471 nm + N x channel-spacing (measured in nm)
where 1471 nm is the ITU-T 'anchor wavelength' for
transmission over the C band; and where 'channel-spacing' is
defined by the cwdm-ch-spc-type.";
reference
"RFC6205: Generalized Labels for Lambda-Switch-Capable (LSC)
Label Switching Routers,
ITU-T G.694.2 (12/2003): Spectral grids for WDM applications:
CWDM wavelength grid";
}
typedef flexi-n {
type int16;
description
"The given value 'N' is used to determine the nominal central
frequency.
The nominal central frequency, 'f' is defined by,
f = 193100.000 GHz + N x channel-spacing (measured in GHz),
where 193100.000 GHz (193.100000 THz) is the ITU-T 'anchor
frequency' for transmission over the C band; and where
'channel-spacing' is defined by the flexi-ch-spc-type.
Note that the term 'channel-spacing' can be alternated by the
term 'nominal central frequency granularity' defined in
clause 7 of ITU-T G.694.1.";
reference
"RFC7698: Framework and Requirements for GMPLS-Based Control
of Flexi-Grid Dense Wavelength Division Multiplexing (DWDM)
Networks.
ITU-T G.694.1 (02/2012): Spectral grids for WDM applications:
DWDM frequency grid";
}
typedef flexi-m {
type uint16;
description
"The given value 'M' is used to determine the slot width.
A slot width is defined by:
slot width = M x SWG (measured in GHz),
where SWG is defined by the flexi-slot-width-granularity.";
reference
"RFC7698: Framework and Requirements for GMPLS-Based Control
of Flexi-Grid Dense Wavelength Division Multiplexing (DWDM)
Networks.
ITU-T G.694.1 (02/2012): Spectral grids for WDM applications:
DWDM frequency grid";
}
identity l0-grid-type {
description
"Layer 0 grid type";
reference
"RFC6163:Framework for GMPLS and Path Computation Element
(PCE) Control of Wavelength Switched Optical Networks (WSONs),
ITU-T G.694.1 (02/2012): Spectral grids for WDM applications:
DWDM frequency grid,
ITU-T G.694.2 (12/2003): Spectral grids for WDM applications:
CWDM wavelength grid";
}
identity flexi-grid-dwdm {
base l0-grid-type;
description
"Flexi-grid";
reference
"RFC7698: Framework and Requirements for GMPLS-Based Control
of Flexi-Grid Dense Wavelength Division Multiplexing (DWDM)
Networks,
ITU-T G.694.1 (02/2012): Spectral grids for WDM applications:
DWDM frequency grid";
}
identity wson-grid-dwdm {
base l0-grid-type;
description
"DWDM grid";
reference
"RFC6163:Framework for GMPLS and Path Computation Element
(PCE) Control of Wavelength Switched Optical Networks (WSONs),
ITU-T G.694.1 (02/2012): Spectral grids for WDM applications:
DWDM frequency grid";
}
identity wson-grid-cwdm {
base l0-grid-type;
description
"CWDM grid";
reference
"RFC6205: Generalized Labels for Lambda-Switch-Capable (LSC)
Label Switching Routers,
ITU-T G.694.2 (12/2003): Spectral grids for WDM applications:
CWDM wavelength grid";
}
identity dwdm-ch-spc-type {
description
"DWDM channel spacing type";
reference
"RFC6205: Generalized Labels for Lambda-Switch-Capable (LSC)
Label Switching Routers,
ITU-T G.694.1 (02/2012): Spectral grids for WDM applications:
DWDM frequency grid";
}
identity dwdm-100ghz {
base dwdm-ch-spc-type;
description
"100GHz channel spacing";
}
identity dwdm-50ghz {
base dwdm-ch-spc-type;
description
"50GHz channel spacing";
}
identity dwdm-25ghz {
base dwdm-ch-spc-type;
description
"25GHz channel spacing";
}
identity dwdm-12p5ghz {
base dwdm-ch-spc-type;
description
"12.5GHz channel spacing";
}
identity flexi-ch-spc-type {
description
"Flexi-grid channel spacing type";
reference
"RFC7698: Framework and Requirements for GMPLS-Based Control
of Flexi-Grid Dense Wavelength Division Multiplexing (DWDM)
Networks
ITU-T G.694.1 (02/2012): Spectral grids for WDM applications:
DWDM frequency grid";
}
identity flexi-ch-spc-6p25ghz {
base flexi-ch-spc-type;
description
"6.25GHz channel spacing";
}
identity flexi-slot-width-granularity {
description
"Flexi-grid slot width granularity";
}
identity flexi-swg-12p5ghz {
base flexi-slot-width-granularity;
description
"12.5GHz slot width granularity";
}
identity cwdm-ch-spc-type {
description
"CWDM channel spacing type";
reference
"RFC6205: Generalized Labels for Lambda-Switch-Capable (LSC)
Label Switching Routers,
ITU-T G.694.2 (12/2003): Spectral grids for WDM applications:
CWDM wavelength grid";
}
identity cwdm-20nm {
base cwdm-ch-spc-type;
description
"20nm channel spacing";
}
/* Groupings. */
grouping wson-label-start-end {
description
"The WSON label-start or label-end used to specify WSON label
range.";
choice grid-type {
description
"Label for DWDM or CWDM grid";
case dwdm {
leaf dwdm-n {
when 'derived-from-or-self(../../../grid-type,
"wson-grid-dwdm")'
{
description
"Valid only when grid type is DWDM.";
}
type l0-types:dwdm-n;
description
"The central frequency of DWDM.";
reference
"RFC6205: Generalized Labels for Lambda-Switch-Capable
(LSC) Label Switching Routers";
}
}
case cwdm {
leaf cwdm-n {
when 'derived-from-or-self(../../../grid-type,
"wson-grid-cwdm")'
{
description
"Valid only when grid type is CWDM.";
}
type l0-types:cwdm-n;
description
"Channel wavelength computing input.";
reference
"RFC6205: Generalized Labels for Lambda-Switch-Capable
(LSC) Label Switching Routers";
}
}
}
reference
"RFC6205: Generalized Labels for Lambda-Switch-Capable (LSC)
Label Switching Routers";
}
grouping wson-label-hop {
description
"Generic label hop information for WSON";
choice grid-type {
description
"Label for DWDM or CWDM grid";
case dwdm {
choice single-or-super-channel {
description "single or super channel";
case single {
leaf dwdm-n {
type l0-types:dwdm-n;
description
"The given value 'N' is used to determine the
nominal central frequency.";
}
}
case super {
leaf-list subcarrier-dwdm-n {
type l0-types:dwdm-n;
description
"The given values 'N' are used to determine the
nominal central frequency for each subcarrier
channels.";
reference
"ITU-T Recommendation G.694.1: Spectral grids for
WDM applications: DWDM frequency grid";
}
}
}
}
case cwdm {
leaf cwdm-n {
type l0-types:cwdm-n;
description
"The given value 'N' is used to determine the nominal
central wavelength.";
reference
"RFC6205: Generalized Labels for Lambda-Switch-Capable
(LSC) Label Switching Routers";
}
}
}
reference
"RFC6205: Generalized Labels for Lambda-Switch-Capable (LSC)
Label Switching Routers";
}
grouping l0-label-range-info {
description
"Information about layer 0 label range.";
leaf grid-type {
type identityref {
base l0-grid-type;
}
description "Grid type";
}
leaf priority {
type uint8;
description
"Priority in Interface Switching Capability Descriptor
(ISCD).";
reference
"RFC4203: OSPF Extensions in Support of Generalized
Multi-Protocol Label Switching (GMPLS).";
}
reference
"RFC6205: Generalized Labels for Lambda-Switch-Capable (LSC)
Label Switching Routers";
}
grouping wson-label-step {
description "Label step information for WSON";
choice l0-grid-type {
description
"Grid type: DWDM, CWDM, etc.";
case dwdm {
leaf wson-dwdm-channel-spacing {
when 'derived-from-or-self(../../grid-type,
"wson-grid-dwdm")'
{
description
"Valid only when grid type is DWDM.";
}
type identityref {
base dwdm-ch-spc-type;
}
description
"Label-step is the channel-spacing (GHz), e.g., 100.000,
50.000, 25.000, or 12.500 GHz for DWDM";
reference
"RFC6205: Generalized Labels for Lambda-Switch-Capable
(LSC) Label Switching Routers";
}
}
case cwdm {
leaf wson-cwdm-channel-spacing {
when 'derived-from-or-self(../../grid-type,
"wson-grid-cwdm")'
{
description
"Valid only when grid type is CWDM.";
}
type identityref {
base cwdm-ch-spc-type;
}
description
"Label-step is the channel-spacing (nm), i.e., 20 nm
for CWDM, which is the only value defined for CWDM";
reference
"RFC6205: Generalized Labels for Lambda-Switch-Capable
(LSC) Label Switching Routers";
}
}
}
reference
"RFC6205: Generalized Labels for Lambda-Switch-Capable (LSC)
Label Switching Routers,
ITU-T G.694.2 (12/2003): Spectral grids for WDM applications:
CWDM wavelength grid";
}
grouping flexi-grid-label-start-end {
description
"The Flexi-grid label-start or label-end used to specify
Flexi-grid label range.";
leaf flexi-n {
type l0-types:flexi-n;
description
"The given value 'N' is used to determine the nominal
central frequency.";
}
reference
"RFC7698: Framework and Requirements for GMPLS-Based Control
of Flexi-Grid Dense Wavelength Division Multiplexing (DWDM)
Networks";
}
grouping flexi-grid-frequency-slot {
description "Flexi-grid frequency slot grouping.";
uses flexi-grid-label-start-end;
leaf flexi-m {
type l0-types:flexi-m;
description
"The given value 'M' is used to determine the slot width.";
}
reference
"RFC7698: Framework and Requirements for GMPLS-Based Control
of Flexi-Grid Dense Wavelength Division Multiplexing (DWDM)
Networks";
}
grouping flexi-grid-label-hop {
description
"Generic label hop information for Flexi-grid";
choice single-or-super-channel {
description "single or super channel";
case single {
uses flexi-grid-frequency-slot;
}
case super {
list subcarrier-flexi-n {
key flexi-n;
uses flexi-grid-frequency-slot;
description
"List of subcarrier channels for flexi-grid super
channel.";
}
}
}
reference
"RFC7698: Framework and Requirements for GMPLS-Based Control
of Flexi-Grid Dense Wavelength Division Multiplexing (DWDM)
Networks";
}
grouping flexi-grid-label-range-info {
description
"Flexi-grid-specific label range related information";
uses l0-label-range-info;
container flexi-grid {
description "flexi-grid definition";
leaf slot-width-granularity {
type identityref {
base flexi-slot-width-granularity;
}
default flexi-swg-12p5ghz;
description
"Minimum space between slot widths. Default is 12.500
GHz";
reference
"RFC7698: Framework and Requirements for GMPLS-Based
Control of Flexi-Grid Dense Wavelength Division
Multiplexing (DWDM) Networks";
}
leaf min-slot-width-factor {
type uint16 {
range "1..max";
}
default 1;
description
"A multiplier of the slot width granularity, indicating
the minimum slot width supported by an optical port.
Minimum slot width is calculated by:
Minimum slot width (GHz) =
min-slot-width-factor * slot-width-granularity.";
reference
"RFC8363: GMPLS OSPF-TE Extensions in Support of Flexi-
Grid Dense Wavelength Division Multiplexing (DWDM)
Networks";
}
leaf max-slot-width-factor {
type uint16 {
range "1..max";
}
must '. >= min-slot-width-factor' {
error-message
"Maximum slot width must be greater than or equal to
minimum slot width.";
}
description
"A multiplier of the slot width granularity, indicating
the maximum slot width supported by an optical port.
Maximum slot width is calculated by:
Maximum slot width (GHz) =
max-slot-width-factor * slot-width-granularity
If specified, maximum slot width must be greater than or
equal to minimum slot width.If not specified, maximum
slot width is equal to minimum slot width.";
reference
"RFC8363: GMPLS OSPF-TE Extensions in Support of Flexi-
Grid Dense Wavelength Division Multiplexing (DWDM)
Networks";
}
}
}
grouping flexi-grid-label-step {
description "Label step information for flexi-grid";
leaf flexi-grid-channel-spacing {
type identityref {
base flexi-ch-spc-type;
}
default flexi-ch-spc-6p25ghz;
description
"Label-step is the nominal central frequency granularity
(GHz), e.g., 6.25 GHz";
reference
"RFC7699: Generalized Labels for the Flexi-Grid in Lambda
Switch Capable (LSC) Label Switching Routers";
}
leaf flexi-n-step {
type uint8;
description
"This attribute defines the multiplier for the supported
values of 'N'.
For example, given a grid with a nominal central frequency
granularity of 6.25 GHz, the granularity of the supported
values of the nominal central frequency could be 12.5 GHz.
In this case, the values of flexi-n should be even and this
constraint is reported by setting the flexi-n-step to 2.
This attribute is also known as central frequency
granularity in RFC8363.";
reference
"RFC8363: GMPLS OSPF-TE Extensions in Support of Flexi-Grid
Dense Wavelength Division Multiplexing (DWDM) Networks";
}
}
}