module ietf-softwire-br {
yang-version 1.1;
namespace "urn:ietf:params:xml:ns:yang:ietf-softwire-br";
prefix "softwire-br";
import ietf-inet-types {
prefix inet;
reference
"Section 4 of RFC 6991";
}
import ietf-yang-types {
prefix yang;
reference
"Section 3 of RFC 6991";
}
import ietf-softwire-common {
prefix softwire-common;
reference
"RFC XXXX: YANG Modules for IPv4-in-IPv6 Address plus Port
Softwires";
}
organization
"IETF Softwire Working Group";
contact
"WG Web:
WG List:
Qi Sun
Linhui Sun
Yong Cui
Ian Farrer
Sladjana Zoric
Mohamed Boucadair
Rajiv
";
description
"This document defines a YANG data module for the configuration and
management of A+P Softwire Border Routers. It covers Lightweight
4over6, MAP-E, and MAP-T mechanisms.
Copyright (c) 2018 IETF Trust and the persons identified
as authors of the code. All rights reserved.
This version of this YANG module is part of RFC XXXX; see the RFC
itself for full legal notices.";
revision 2018-10-19 {
description
"Initial revision.";
reference
"RFC XXXX: YANG Modules for IPv4-in-IPv6 Address plus Port
Softwires";
}
/*
* Groupings
*/
grouping port-set {
description
"Describes a set of layer 4 port numbers.
This may be a simple port range, or use the Port Set
Identifier (PSID) algorithm to represent a range of transport
layer ports which will be used by a NAPT.";
leaf psid-offset {
type uint8 {
range 0..16;
}
description
"The number of offset bits. In Lightweight 4over6,
the default value is 0 for assigning one contiguous
port range. In MAP-E/T, the default value is 6,
which means the system ports (0-1023) are excluded by
default and the assigned port ranges are distributed across the
entire port space, depending on either psid-len or the
number of contiguous ports.";
}
leaf psid-len {
type uint8 {
range 0..15;
}
mandatory true;
description
"The length of PSID, representing the sharing
ratio for an IPv4 address. This, along with ea-len, can
be used to calculate the number of contiguous ports per
port range";
}
leaf psid {
type uint16;
mandatory true;
description
"Port Set Identifier (PSID) value, which
identifies a set of ports algorithmically.";
}
}
grouping binding-entry {
description
"The binding BR maintains an address binding table that
contains the binding between the CE's IPv6 address,
the allocated IPv4 address and restricted port-set.";
leaf binding-ipv6info {
type union {
type inet:ipv6-address;
type inet:ipv6-prefix;
}
description
"The IPv6 information for a CE binding entry.
When the IPv6 prefix type is used,
the IPv6 source address of the CE is constructed
according to the description in RFC7596;
if the IPv6 address type is used, the CE can use
any valid /128 address from a prefix assigned to
the CE.";
reference
"RFC7596: Lightweight 4over6: An Extension to the Dual-Stack
Lite Architecture";
}
leaf binding-ipv4-addr {
type inet:ipv4-address;
description
"The IPv4 address assigned to the binding CE,
which is used as the IPv4 external address
for binding CE local NAPT44.";
}
container port-set {
description
"For Lightweight 4over6, the default value
for offset should be 0, to configure one contiguous
port range.";
uses port-set {
refine "psid-offset" {
default "0";
}
}
}
leaf br-ipv6-addr {
type inet:ipv6-address;
description
"The IPv6 address for binding BR.";
}
}
/*
* Features
*/
feature binding-mode {
description
"Binding is used for configuring the Lightweight 4over6 mechanism.
Binding based softwire mechanisms are IPv4-over-IPv6 tunnelling
transition mechanisms specifically intended for complete
independence between the IPv6 subnet prefix (and IPv6 address) and
IPv4 address, with or without IPv4 address sharing.
This is accomplished by maintaining state for each softwire
(per-subscriber state) in the central Border Relay (BR) and using
a hub-and-spoke forwarding architecture. In order to delegate the
NAPT function and achieve IPv4 address sharing, port-restricted
IPv4 addresses needs to be allocated to CEs.
This feature indicates that the instance functions as a binding
based softwire instance.";
reference
"RFC7596: Lightweight 4over6: An Extension to the Dual-Stack Lite
Architecture
RFC7597: Mapping of Address and Port with Encapsulation (MAP-E)
RFC7599: Mapping of Address and Port using Translation (MAP-T)";
}
feature map-e {
description
"MAP-E is an IPv6 transition mechanism for transporting IPv4
packets across an IPv6 network using IP encapsulation. MAP-E
allows for a reduction of the amount of centralized state using
rules to express IPv4/IPv6 address mappings. This introduces an
algorithmic relationship between the IPv6 subnet and IPv4 address.
This feature indicates that the instance functions as a MAP-E.";
reference
"RFC7597: Mapping of Address and Port with Encapsulation (MAP-E)";
}
feature map-t {
description
"MAP-T is an IPv6 transition mechanism for transporting IPv4
packets across an IPv6 network using IP translation. It leverages
a double stateless NAT64 based solution as well as the stateless
algorithmic address & transport layer port mapping algorithm
defined for MAP-E.
This feature indicates that the instance functions as a MAP-T instance.";
reference
"RFC7599: Mapping of Address and Port using Translation (MAP-T)";
}
container br-instances {
description
"BR Instances";
choice br-type {
description
"Select binding or algorithmic BR functionality.";
case binding {
if-feature binding-mode;
container binding {
description
"binding mechanism (binding table) configuration.";
list bind-instances {
key "id";
description
"A set of binding BRs to be configured.";
container binding-table-versioning {
description "binding table's version";
leaf version{
type uint64;
description "Incremental version number of the binding
table";
}
leaf date {
type yang:date-and-time;
description "Timestamp of the binding
table";
}
}
leaf id {
type uint32;
mandatory true;
description "An instance identifier.";
}
leaf name {
type string;
description "The name for the binding BR.";
}
leaf softwire-num-max {
type uint32;
mandatory true;
description
"The maximum number of softwires that can be created on
the binding BR.";
}
leaf softwire-payload-mtu {
type uint16;
units bytes;
mandatory true;
description
"The payload IPv4 MTU for binding softwire.";
}
leaf softwire-path-mru {
type uint16;
units bytes;
mandatory true;
description
"The path MRU for binding softwire.";
}
leaf enable-hairpinning {
type boolean;
default true;
description
"Enables/disables support for locally forwarding
(hairpinning) traffic between two CEs.";
reference
"RFC7596 Section 6.2";
}
container binding-table {
description "binding table";
list binding-entry {
key "binding-ipv6info";
description "binding entry";
uses binding-entry;
}
}
container icmp-policy {
description
"The binding BR can be configured to process or drop
incoming ICMP messages, and to generate outgoing ICMP
error messages.";
container icmpv4-errors {
description
"ICMPv4 error processing configuration";
leaf allow-incoming-icmpv4 {
type boolean;
default true;
description
"Enables the processing of incoming ICMPv4
packets.";
reference
"RFC7596: Lightweight 4over6: An Extension to the
Dual-Stack Lite Architecture";
}
leaf icmpv4-rate {
type uint32;
description
"Rate limit threshold in messages per-second
for processing incoming ICMPv4 errors messages";
}
leaf generate-icmpv4-errors {
type boolean;
default true;
description
"Enables the generation of outgoing ICMPv4 error
messages on receipt of an inbound IPv4 packet with
no matching binding table entry.";
reference
"Seciton 5.2 of RFC7596.";
}
}
container icmpv6-errors {
description
"ICMPv6 error processing configuration";
leaf generate-icmpv6-errors {
type boolean;
default true;
description
"Enables the generation of ICMPv6 error messages if
no matching binding table entry is found for a
received packet.";
reference
"Section 6.2 of RFC7596.";
}
leaf icmpv6-rate {
type uint32;
description
"Rate limit threshold in messages per-second
for sending ICMPv6 errors messages";
reference
"Section 9 of RFC7596.";
}
}
}
container traffic-stat {
config false;
description
"Traffic statistics information for the BR.";
leaf discontinuity-time {
type yang:date-and-time;
mandatory true;
description
"The time of the most recent occasion on which the BR
instance suffered a discontinuity. This must be
initialized when the BR instance is configured
or rebooted.";
}
uses softwire-common:traffic-stat;
leaf dropped-icmpv4-packets {
type yang:zero-based-counter64;
description
"ICMPv4 packets that are dropped as a result
of the ICMP policy. Typically, this can be any
incoming ICMPv4 packets if ICMPv4 processing is
disabled or incoming ICMPv4 packets that exceed
the ICMPv4 rate-limit threshold.
Discontinuities in the value of this counter can
occur at re-initialization of the management
system, and at other times as indicated by
the value of 'discontinuity-time'.";
}
leaf dropped-icmpv4-bytes {
type yang:zero-based-counter64;
description
"ICMPv4 messages, in bytes, that are dropped as
a result of the ICMP policy. Typically, it
can be any incoming ICMPv4 packets if ICMPv4
processing is disabled or incoming ICMPv4
packets that exceed the ICMPv4 rate-limit
threshold.
Discontinuities in the value of this counter can
occur at re-initialization of the management
system, and at other times as indicated by
the value of 'discontinuity-time'.";
}
leaf hairpin-ipv4-packets {
type yang:zero-based-counter64;
description
"IPv4 packets locally routed between two CEs
(hairpinned).
Discontinuities in the value of this counter can
occur at re-initialization of the management
system, and at other times as indicated by
the value of 'discontinuity-time'.";
}
leaf hairpin-ipv4-bytes {
type yang:zero-based-counter64;
description
"IPv4 bytes locally routed between two CEs
(hairpinned).
Discontinuities in the value of this counter can
occur at re-initialization of the management
system, and at other times as indicated by
the value of 'discontinuity-time'.";
}
leaf active-softwire-num {
type uint32;
config false;
description
"The number of currently active softwires on the
binding instance.
Discontinuities in the value of this counter can
occur at re-initialization of the management
system, and at other times as indicated by
the value of 'discontinuity-time'.";
}
}
}
}
}
case algo {
if-feature "map-e or map-t";
container algorithm {
description
"Indicate that the instance supports the MAP-E and/or MAP-T
function. The instances advertise the MAP-E/MAP-T feature
through the capability exchange mechanism when a NETCONF
session is established.";
list algo-instances {
key "id";
description "Instances of algorithm";
leaf id {
type uint32;
mandatory true;
description "Identifier of the algorithm instance.";
}
uses softwire-common:algorithm-instance;
container port-set {
description "Indicates a set of ports.";
uses port-set;
}
container traffic-stat {
config false;
description
"Traffic statistics information for the BR.";
leaf discontinuity-time {
type yang:date-and-time;
mandatory true;
description
"The time of the most recent occasion on which the BR
instance suffered a discontinuity. This must be reset
to the current date-and-time when the BR instance
is configured or rebooted.";
}
uses softwire-common:traffic-stat;
}
}
}
}
}
}
/*
* Notifications
*/
notification softwire-binding-instance-event {
if-feature binding-mode;
description "Notifications for binding instance.";
leaf bind-id {
type leafref {
path
"/br-instances/binding/"
+ "bind-instances/id";
}
description "The ID of the binding-instance that
generated the notification.";
}
leaf-list invalid-entry {
type leafref {
path
"/br-instances/binding/"
+ "bind-instances[id=current()/../bind-id]/"
+ "binding-table/binding-entry/binding-ipv6info";
}
description
"Notify the client that a specific binding entry has
expired or is invalid. The binding-ipv6info identifies an entry.";
}
leaf-list added-entry {
type inet:ipv6-address;
description
"Notify the client that a binding entry has been added.
The ipv6 address of that entry is the index. The client
gets other information from the binding BR about the entry
indexed by that ipv6 address.
";
}
leaf-list modified-entry {
type leafref {
path
"/br-instances/binding/"
+ "bind-instances[id=current()/../bind-id]/"
+ "binding-table/binding-entry/binding-ipv6info";
}
description "The ID of the the binding-table entry that
has been modified.";
}
}
notification softwire-algorithm-instance-event {
if-feature "map-e or map-t";
description "Notifications for algorithmic instance.";
leaf algo-id {
type leafref {
path
"/br-instances/algorithm/algo-instances/id";
}
mandatory true;
description "algorithmic instance event.";
}
leaf-list invalid-entry-id {
type leafref {
path
"/br-instances/algorithm/algo-instances/id";
}
description "Invalid entry event.";
}
leaf-list added-entry {
type leafref {
path
"/br-instances/algorithm/algo-instances/id";
}
description "Added entry.";
}
leaf-list modified-entry {
type leafref {
path
"/br-instances/algorithm/algo-instances/id";
}
description "Modified entry.";
}
}
}