Network Working Group A. Bisht Internet-Draft Cisco Intended status: Informational 15 November 2026 Expires: 19 May 2027 Detecting AI-Driven Subscriber Advantage in Media over QUIC (MOQ) draft-altanai-moq-ai-subscriber-advantage-00 Abstract This document describes subscriber behavior that may produce sustained advantages in service outcomes or disproportionate resource consumption at shared Media over QUIC (MoQ) relays. AI-assisted optimization is a motivating scenario; observations alone cannot establish whether AI was used or caused a disparity. The document outlines contextual measurement, privacy safeguards, and a proposed extension for authorization-bound resource budgets with explicit accounting and recovery behavior. It builds on existing MoQ authorization and relay denial-of-service work. This informational document defines no new MoQ messages, token claims, registries, or standardized detection algorithm. Discussion Venues This note is to be removed before publishing as an RFC. Discussion of this document takes place on the Media Over QUIC Working Group mailing list (moq@ietf.org), which is archived at https://mailarchive.ietf.org/arch/browse/moq/. Source for this draft and an issue tracker can be found at https://github.com/altanai/draft-altanai-moq-ai-subscriber-advantage. Status of This Memo This Internet-Draft is submitted in full conformance with the provisions of BCP 78 and BCP 79. Internet-Drafts are working documents of the Internet Engineering Task Force (IETF). Note that other groups may also distribute working documents as Internet-Drafts. The list of current Internet- Drafts is at https://datatracker.ietf.org/drafts/current/. Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress." Bisht Expires 19 May 2027 [Page 1] Internet-Draft MOQ Subscriber Advantage November 2026 This Internet-Draft will expire on 19 May 2027. Copyright Notice Copyright (c) 2026 IETF Trust and the persons identified as the document authors. All rights reserved. This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (https://trustee.ietf.org/ license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Revised BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Revised BSD License. Table of Contents 1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . 2 2. Terminology and Scope . . . . . . . . . . . . . . . . . . . . 3 3. Motivation and Problem Statement . . . . . . . . . . . . . . 4 3.1. Priority Scope . . . . . . . . . . . . . . . . . . . . . 4 4. Observable Signals and Context . . . . . . . . . . . . . . . 5 4.1. Contextual Comparison . . . . . . . . . . . . . . . . . . 6 5. Deployment Components . . . . . . . . . . . . . . . . . . . . 6 6. Privacy Process . . . . . . . . . . . . . . . . . . . . . . . 7 7. Authorization-Bound Resource Budgets . . . . . . . . . . . . 8 7.1. Usage State and Multiple Sessions . . . . . . . . . . . . 9 7.2. Policy Response and Recovery . . . . . . . . . . . . . . 10 8. Worked Examples . . . . . . . . . . . . . . . . . . . . . . . 10 8.1. A Comparison Signal . . . . . . . . . . . . . . . . . . . 10 8.2. Four Authorized Active Subscriptions . . . . . . . . . . 11 9. Relationship to Other Work . . . . . . . . . . . . . . . . . 11 10. Security and Privacy Considerations . . . . . . . . . . . . . 12 11. IANA Considerations . . . . . . . . . . . . . . . . . . . . . 13 12. Informative References . . . . . . . . . . . . . . . . . . . 13 Author's Address . . . . . . . . . . . . . . . . . . . . . . . . 14 1. Introduction Media over QUIC Transport (MoQT) [MoQTransport] supports delivery of tracks through relays that serve multiple subscribers. Endpoints can optimize track selection, request timing, subscription filters, and relative priority. These choices may be made by an AI model, a conventional adaptive algorithm, or fixed application rules. Bisht Expires 19 May 2027 [Page 2] Internet-Draft MOQ Subscriber Advantage November 2026 Operators may wish to identify sustained differences in resource use or service outcomes among comparable subscribers. A disparity can be useful for capacity planning, service assurance, or a review of relay policy. It is not by itself evidence of misconduct, an unfair policy, or use of AI. Higher quality can be a legitimate result of a better path, authorized service treatment, or more efficient application behavior. This document develops two related questions: how to observe such patterns while limiting subscriber data exposure, and how a future resource-budget profile could associate explicit usage limits with existing authorization mechanisms. The latter extends the original detection scope and is presented as design considerations for further work, rather than a completed token or enforcement specification. 2. Terminology and Scope A subscriber endpoint can hold multiple subscriptions. A subscription is a relationship for receiving one track; it is distinct from a MoQT session, which can carry multiple subscriptions and fetches. Separate subscriber endpoints commonly use separate sessions. The object and session model is defined by [MoQTransport]. For this document, a _comparison cohort_ is a group of observations matched for content, service policy, observation interval, and relevant path conditions. A _candidate advantage_ is a sustained disparity in resource use or delivery outcomes within such a cohort. The designation identifies a measurement for review and does not establish its cause. A _resource budget_ is a proposed policy describing an allowed amount, rate, or concurrency of a defined resource. An _accounting domain_ is the set of sessions and relay instances over which that budget applies. An _accounting reference_ identifies the shared usage state within that domain and validity period; it need not expose an account identity to an analytics system. In scope are observable signals, interpretation of those signals, privacy-conscious processing, resource-budget design considerations, and relationships to existing MoQ and SIP mechanisms. Out of scope are AI-versus-human attestation, universal definitions of fairness, monetary penalties, standardized machine-learning algorithms or thresholds, and new token encodings or protocol error codes. The illustrative policies below are not interoperability requirements. Bisht Expires 19 May 2027 [Page 3] Internet-Draft MOQ Subscriber Advantage November 2026 3. Motivation and Problem Statement Shared relay resources include CPU, subscription state, buffer memory, cache capacity, backend services, and upstream and downstream bandwidth. The incremental cost of a request depends on the implementation and whether suitable upstream subscriptions or cached objects already exist. Subscription aggregation can reduce upstream work. Substantial media delivery following a small request is normal protocol operation and is not sufficient evidence of abuse or harmful amplification. Candidate concerns include: * Repeated creation and cancellation of subscriptions, or frequent updates, causing processing and state-management costs. * Request patterns that increase fetch work, cache turnover, or egress, subject to the relay's caching and aggregation behavior. * Buffer accumulation from slow consumption or join-time delivery. * A session consuming a disproportionate share of a constrained relay resource under the operator's allocation policy. These concerns overlap with the threat analysis and operational guidance in [RelayDoS]. This document emphasizes contextual comparison and privacy considerations, together with an exploratory connection between usage measurement and explicit resource authorization. 3.1. Priority Scope Subscriber priority influences transmission ordering among subscriptions and fetch responses within the same MoQT session. A subscriber requesting priority 0 does not thereby acquire a protocol- defined rank above a subscriber in another session. Relays are advised not to copy downstream subscriber priorities directly to upstream subscriptions; upstream priorities depend on relay policy [MoQTransport]. Frequent priority updates may consume parsing and scheduling resources. Effects on other subscribers depend on shared-resource contention and implementation policy. A priority value, a priority change, or an improved delivery outcome alone does not demonstrate an unfair advantage. A subscriber priority adjustment also does not implement a relay-wide resource restriction across independent sessions. Bisht Expires 19 May 2027 [Page 4] Internet-Draft MOQ Subscriber Advantage November 2026 4. Observable Signals and Context The following signals are candidates rather than mandatory metrics. They are available only where a deployment can measure or attribute them. Content or timing metadata can itself be sensitive even when media payloads remain encrypted. +==============+====================================================+ | Signal | Interpretation and context | +==============+====================================================+ | Subscription | Count creations, cancellations, and updates | | lifecycle | over a defined interval; distinguish useful | | activity | adaptation, retries, and pathological churn. | +--------------+----------------------------------------------------+ | Track and | Compare changes relative to available content | | filter | and group boundaries without retaining | | changes | unnecessary viewing histories. | +--------------+----------------------------------------------------+ | Priority | Measure update frequency and work; priority | | updates | values are relative within a session. | +--------------+----------------------------------------------------+ | FETCH and | Account for historical delivery, repair, and | | SUBSCRIBE | duplicate requests; define what the byte count | | mix | includes. | +--------------+----------------------------------------------------+ | Resource | Measure attributable egress, buffered bytes, or | | consumption | control-processing work; identify shared costs | | | that cannot be assigned to one subscriber. | +--------------+----------------------------------------------------+ | Delivery | Measure request-to-first-object or relay- | | outcomes | observed delivery delay using defined endpoints | | | and clocks; do not equate these with playback | | | quality. | +--------------+----------------------------------------------------+ | Cache and | Use available hit, miss, eviction, and | | upstream | upstream-work counters while accounting for | | effects | sharing among subscribers. | +--------------+----------------------------------------------------+ Table 1 [MoQMetrics] provides related measurement work. This document does not redefine its metrics or assume that every candidate signal is already standardized. Bisht Expires 19 May 2027 [Page 5] Internet-Draft MOQ Subscriber Advantage November 2026 4.1. Contextual Comparison Choose a cohort and a measurement interval before interpreting a disparity. Relevant context includes track variant and bitrate, subscription duration, publisher timing, authorized service class, cache state, path latency, congestion, and the relay's allocation policy. Normalize measurements by active time or useful delivered content where appropriate, and state the limits of attribution and sampling. Persistence over several intervals can distinguish a sustained pattern from a short transition, but does not demonstrate causality. An analyzer should be able to return an inconclusive result when the cohort is too small or required context is missing. Controlled experiments with known client implementations can study AI-assisted behavior; relay telemetry alone cannot reliably label arbitrary endpoints as AI or non-AI. 5. Deployment Components A possible deployment separates forwarding, budget accounting, and privacy-limited analysis. These are logical components and may be co-located. Existing token schemes provide the authorization foundation; resource-budget interpretation and accounting require further design. Grant issuer -- authorization --> Subscriber | token + request | v Publisher ---- media objects ---> Relay | resource-use measurements | v Budget ledger / \ limited signals limit decision / \ Privacy guard Relay policy | response v Authorized review The issuer grants permissions. The relay validates the presented authorization and maintains or consults usage state. The analytics path receives the minimum information needed for comparison and Bisht Expires 19 May 2027 [Page 6] Internet-Draft MOQ Subscriber Advantage November 2026 review, subject to the privacy process below. A comparison flag and a verified budget violation are separate inputs to operator decisions. 6. Privacy Process The following deployment safeguards elaborate aggregation and minimal retention. They are design guidance and do not establish a formal anonymity guarantee. General privacy considerations are discussed in [RFC6973]. Related AI-preference binding work [AIPrefRealtime] can inform treatment of expressed processing preferences; a preference signal does not itself anonymize data or authorize unrelated use. 1. *Define purpose and permitted processing.* Identify the measurement purpose, permitted fields, applicable preferences, and authorized recipients. Relay visibility of a field does not establish permission to retain or disclose it for every analytics purpose. 2. *Minimize collection.* Prefer counters and necessary control metadata. Avoid media-payload inspection, direct account identifiers in analytics, and AI-versus-human labels inferred from traffic. 3. *Scope pseudonyms.* Use short-lived identifiers specific to an analysis domain and interval. If a re-identification mapping is needed, keep it separately protected. A linkable token is pseudonymous, not anonymous, even if it does not contain a subscriber's name. 4. *Aggregate with context.* Prefer interval and cohort statistics. Coarsen or suppress small groups or detailed combinations that could reveal an individual. Minimum cohort sizes and any stronger privacy guarantees need to be defined by the deployment or a future profile. 5. *Limit and audit review.* Report the interval, cohort size, disparity, and measurement caveats. Restrict detailed inspection to authorized reviewers and record that access. A comparison flag alone does not establish a policy violation or justify automatic punishment. 6. *Expire detailed records.* Define retention periods for events, pseudonym mappings, usage state, and review records according to their respective purposes. Delete or aggregate records when those purposes end. A future profile needs explicit retention and deletion behavior. Bisht Expires 19 May 2027 [Page 7] Internet-Draft MOQ Subscriber Advantage November 2026 Budget accounting may require continuity across sessions or token renewals. That continuity should remain within the stated accounting domain and budget period. Analytics pseudonym rotation does not reset usage counters. Conversely, maintaining a budget does not justify a permanent identifier shared across unrelated operators. Privacy Pass work [PrivacyPass] is relevant to privacy-conscious authorization; maintaining shared quotas and preventing repeated issuance from resetting usage require an explicit design under the chosen token scheme. 7. Authorization-Bound Resource Budgets MoQT already carries authorization tokens [MoQTransport]. [C4M] defines action and content scopes for Common Access Tokens and supports revalidation of ongoing authorization. The proposed direction is to specify how an authorized resource policy would be interpreted and accounted for, reusing existing token capabilities where suitable. The following are conceptual policy elements, not registered claims: Bisht Expires 19 May 2027 [Page 8] Internet-Draft MOQ Subscriber Advantage November 2026 +==================+===============================================+ | Policy element | Design question | +==================+===============================================+ | Service class or | Which agreed policy does this label select, | | policy reference | and which version applies? | +------------------+-----------------------------------------------+ | Content and | Which tracks, namespaces, and actions are | | operation scope | permitted under existing authorization rules? | +------------------+-----------------------------------------------+ | Resource | What concurrency, rate, bytes, or other | | allowance | measurable quantity is allowed? | +------------------+-----------------------------------------------+ | Measurement | Is the allowance instantaneous, rolling, or | | window | tied to an explicit interval; what burst | | | behavior is permitted? | +------------------+-----------------------------------------------+ | Accounting scope | Which sessions, relays, and issuer or | | | operator domain share usage state? | +------------------+-----------------------------------------------+ | Accounting | How are related authorizations associated | | reference | with one budget without revealing unnecessary | | | identity? | +------------------+-----------------------------------------------+ | Validity and | When does the grant expire, and how does | | renewal | renewal interact with remaining or already- | | | used budget? | +------------------+-----------------------------------------------+ Table 2 A subscriber cannot grant itself a more generous policy by modifying a trusted authorization. The issuer and verifier need integrity- protected claims and an agreed interpretation. Adding an arbitrary field is not sufficient: an implementation that does not understand a resource restriction must not silently treat it as an unrestricted grant. Any future encoding needs to follow the chosen token scheme's extension and validation rules. This document does not allocate such an encoding. 7.1. Usage State and Multiple Sessions An authorization expresses a grant; it is not a mutable usage counter. For example, four authorized concurrent subscriptions require the relay to track admission and release of those subscriptions. Multiple tokens or sessions associated with the same budget must share the intended accounting state rather than each receiving the full allowance again. Bisht Expires 19 May 2027 [Page 9] Internet-Draft MOQ Subscriber Advantage November 2026 A future profile needs to define atomic admission decisions, treatment of pending and paused subscriptions, cancellation, disconnects, expiry, and reclamation of abandoned reservations. If several relays enforce a shared budget, the design needs to state its consistency model and how it handles partitions or accounting-service failures. Partitioned allowances or leases are possible approaches requiring further analysis. Revalidating an unchanged signature does not by itself reveal a quota change or update shared counters. Changes to authorization require a specified mechanism such as a stateful policy check, a replacement grant, expiry, or a supported revocation mechanism. Fresh token issuance and renewal need explicit rules so that they cannot unintentionally reset an exhausted allowance. These requirements must be reconciled with privacy and unlinkability objectives of the selected authorization scheme. 7.2. Policy Response and Recovery A relay can enforce a clear admission or rate rule without inferring AI use, intent, or moral fault. Possible responses include rejecting an excess request, applying a temporary request-rate limit, or requiring renewed authorization where appropriate to the token scheme. Operators choose policy and thresholds; this document defines no universal penalty. A future profile needs to describe protocol feedback, recovery conditions, restriction duration, and review of disputed measurements. It should distinguish exhausted resources or quotas from invalid authorization and use existing protocol errors according to their defined meanings. This document assigns no new error codes and does not redefine subscriber priority as a cross-session enforcement mechanism. 8. Worked Examples All values in this section are illustrative. They are neither measured results nor standardized thresholds. 8.1. A Comparison Signal Consider seven subscriptions to the same live track, active for ten minutes, under the same service policy and similar measured path conditions. Suppose subscriber A has 88 MB/min of relay egress compared with a peer median of 37 MB/min, and a median relay-observed delivery delay of 104 ms compared with 181 ms. The egress counter includes repeat and historical delivery as well as live objects; it does not count unique content alone. Bisht Expires 19 May 2027 [Page 10] Internet-Draft MOQ Subscriber Advantage November 2026 An analyzer could report the sustained difference for review. It would still need to examine fetches, duplicate delivery, caching, publisher behavior, and measurement quality. Higher egress and lower delay do not prove that A caused another subscriber's delay, used AI, or exceeded an authorized budget. An explicit policy violation requires separate evidence against that policy. 8.2. Four Authorized Active Subscriptions Suppose an issuer grants access to an event namespace with a policy allowing four active subscriptions across the sessions sharing one budget. The grant is valid for ten minutes. These are conceptual policy values; this document defines no claim names or serialization for them. The relay admits four subscriptions and records four reservations. A fifth active subscription would exceed the allowance, so the relay rejects that request with appropriate existing feedback under its policy. The four admitted subscriptions remain governed by their existing terms. Repeated excess requests may trigger a documented temporary request-rate restriction. Admission can resume when a reservation is released and any temporary restriction has ended, subject to valid authorization. The accounting reference is scoped to the operator and budget period. Detailed review is access-controlled, and retention follows the purposes specified above. Opening another session or obtaining another token for the same budget does not create another four reservations. How that association is securely established remains part of the future profile. 9. Relationship to Other Work * *MoQ transport and metrics:* [MoQTransport] supplies the object, subscription, priority, and authorization framework. [MoQMetrics] provides related measurement work. This document does not replace transport flow control or congestion control [RFC9000]. * *MoQ relay DoS:* [RelayDoS] already discusses cost tracking, per- client or per-identity limits, buffering, and resource isolation. The comparative measurement and privacy guidance here complements that work. Authorization and budget semantics should be developed in coordination with the relevant MoQ authorization work. Bisht Expires 19 May 2027 [Page 11] Internet-Draft MOQ Subscriber Advantage November 2026 * *Common Access Tokens and Privacy Pass:* [C4M] and [PrivacyPass] provide existing authorization approaches. The resource-budget design needs further comparison with their capabilities, including the underlying Common Access Token specification. Token-based permission alone is not claimed as a new contribution. * *SIP overload and authorized priority:* [RFC6357], [RFC7339], and [RFC7415] address SIP signaling overload; [RFC6357] discusses capacity allocation among upstream neighbors. [RFC4412] permits policy-authorized resource priority. These are useful precedents but operate at different scopes from per-subscriber MoQ relay analysis. * *RTP congestion control:* [RFC8836] and [RFC8888] concern media congestion-control requirements and feedback. They do not themselves define the cohort comparison or authorization-bound relay budget considered here. SIP deployments may face related questions around shared call-control or media resources. A SIP proxy and a media relay do not necessarily observe the same events. A SIP-specific design would require a separate measurement model and is not specified by this document. 10. Security and Privacy Considerations Behavioral metadata can expose viewing patterns, correlate sessions, and support identity inference. Pseudonyms and aggregates do not eliminate those risks. Cohort size, granularity, retention, recipient access, and correlation across purposes all affect exposure. The privacy process above describes proposed safeguards, not a proof of anonymity. A malicious client could distribute requests across sessions or tokens to avoid isolated limits. A malicious or faulty accounting component could overstate consumption and deny legitimate service. Shared ledgers and revalidation endpoints can themselves become overload targets. Budget enforcement therefore needs explicit trust boundaries, protected accounting state, bounded processing, recovery behavior, and auditable operator decisions. Local operator controls may still be needed during accounting failures or legitimate flash crowds. An advantage signal is not an authorization credential and does not establish AI use or intent. A service-class claim does not reserve physical capacity unless the deployment separately provides such a service. This document does not change MoQT or QUIC security properties, and its examples do not authorize disclosure of subscriber identity or cross-operator reputation records. Bisht Expires 19 May 2027 [Page 12] Internet-Draft MOQ Subscriber Advantage November 2026 11. IANA Considerations This document has no IANA actions. 12. Informative References [AIPrefRealtime] Bisht, A., "AI Preferences for Real-Time Protocol Bindings", Work in Progress, Internet-Draft, draft- altanai-aipref-realtime-protocol-bindings-01, 4 August 2026, . [C4M] Lemmons, C., Simon, G., Nandakumar, S., and W. Law, "Authorization scheme for MOQT using Common Access Tokens", Work in Progress, Internet-Draft, draft-ietf-moq- c4m-02, 2 November 2026, . [MoQMetrics] Jennings, C. F. and S. Nandakumar, "Metrics over MOQT", Work in Progress, Internet-Draft, draft-jennings-moq- metrics-03, 2 November 2026, . [MoQTransport] Nandakumar, S., Vasiliev, V., Swett, I., and A. Frindell, "Media over QUIC Transport", Work in Progress, Internet- Draft, draft-ietf-moq-transport-23, 2 November 2026, . [PrivacyPass] Nandakumar, S., Jennings, C. F., and T. Meunier, "Privacy Pass Authentication for Media over QUIC (MoQ)", Work in Progress, Internet-Draft, draft-ietf-moq-privacy-pass- auth-04, 1 November 2026, . [RelayDoS] English, M., Pardue, L., Sharma, A., and I. Swett, "Denial-of-Service Considerations for Media over QUIC Relay Deployments", Work in Progress, Internet-Draft, draft-englishm-moq-relay-dos-02, 2 November 2026, . Bisht Expires 19 May 2027 [Page 13] Internet-Draft MOQ Subscriber Advantage November 2026 [RFC4412] Schulzrinne, H. and J. Polk, "Communications Resource Priority for the Session Initiation Protocol (SIP)", RFC 4412, DOI 10.17487/RFC4412, February 2006, . [RFC6357] Hilt, V., Noel, E., Shen, C., and A. Abdelal, "Design Considerations for Session Initiation Protocol (SIP) Overload Control", RFC 6357, DOI 10.17487/RFC6357, August 2011, . [RFC6973] Cooper, A., Tschofenig, H., Aboba, B., Peterson, J., Morris, J., Hansen, M., and R. Smith, "Privacy Considerations for Internet Protocols", RFC 6973, DOI 10.17487/RFC6973, July 2013, . [RFC7339] Gurbani, V., Ed., Hilt, V., and H. Schulzrinne, "Session Initiation Protocol (SIP) Overload Control", RFC 7339, DOI 10.17487/RFC7339, September 2014, . [RFC7415] Noel, E. and P. Williams, "Session Initiation Protocol (SIP) Rate Control", RFC 7415, DOI 10.17487/RFC7415, February 2015, . [RFC8836] Jesup, R. and Z. Sarker, Ed., "Congestion Control Requirements for Interactive Real-Time Media", RFC 8836, DOI 10.17487/RFC8836, January 2021, . [RFC8888] Sarker, Z., Perkins, C., Singh, V., and M. Ramalho, "RTP Control Protocol (RTCP) Feedback for Congestion Control", RFC 8888, DOI 10.17487/RFC8888, January 2021, . [RFC9000] Iyengar, J., Ed. and M. Thomson, Ed., "QUIC: A UDP-Based Multiplexed and Secure Transport", RFC 9000, DOI 10.17487/RFC9000, May 2021, . Author's Address Altanai Bisht Cisco Email: altanai@outlook.com Bisht Expires 19 May 2027 [Page 14]